Resin Infusion Mesh - Green

Resin Infusion Mesh - Green
Per Yard


1 - 9$5.00
10 - 24$4.15
25 - 116$3.50

Airtechs’ Greenflow 75 is a high performance, low profile resin distribution medium designed to promote resin flow during the vacuum infusion process. The tight, low profile crisscross pattern of the infusion mesh distributes a controlled, predictable flow of resin throughout the laminate efficiently and with little waste. The resin will flow slightly slower compared to the red infusion mesh.

The infusion mesh is typically used as a single layer and is placed on top of the peel ply layer. Where even greater resin flow is required, the infusion mesh can be used in multiple layers.

Infusion mesh does not fray when cut or roll up at the ends. It is compatible with polyester, vinyl-ester and epoxy resins and is suitable in vacuum infusion applications up to 302°F (150°C). 

Physical Properties
Width 41"
Thickness .030"
Material Polypropylene
Color Green
Configuration Extruded (Rhombic)
Manufacturer Airtech International
Manufacturer Part Number Greenflow 75


Technical Properties
Max Operating Temperature 302°F
Melt Point 320°F

Please note: All data to be used as a guide only; not a specification. 


Product Data Sheet